Since ancient times, bowls have been a familiar smoking accessory. Most people know how to use this tool before knowing more modern ones.
Using the bowl is too easy for long-time smokers, but novices will be complicated in the first steps. If you are a newbie and are facing this problem, you may not know how to pack a bowl. Here are the summary steps.
- Step 1: Gather Materials
- Step 2: Grind ingredients
- Step 3: Pack the bowl
- Step 4: Inhale
- Step 5: Clean up the bowl
- Step 6: Store for later use
Let’s dive into the article!
What Is A Bowl?
The bowl is the rounding for you to pack the cannabis. It is one of the main parts of the tube that you can see in tubes or bladders.
The shape and operation of the bowl are not always the same. It depends on the location. The bowl can be in a regular tube or a straw. Bowls located at the end of the pipe will have a small hole called a carb.
This carb is responsible for controlling the airflow. When it is covered, the airflow will build up in the chamber. Similar to an empty carb, the smoke chamber is quickly cleared of smoke.
You can also control the airflow by sliding the bowl in and out of the balloon’s down shaft. Besides, some bowls will be carb-free. Instead, there will be carbs on the straw cavity. If your vase is like this, the bowl is removable.
Necessary Items To Pack A Bowl
Besides the bowl’s main character, you need to prepare other items to make the bowl packing process smoothly. These items also contribute to your smoking experience.
The heating element plays a vital role, specifically here is the lighter. Traditional butane lighters will heat better than others. However, you can choose any lighter if you don’t like the taste of butane.
Hemp wick is one of the suggestions you can substitute for butane lighters. This piece of wire is flammable. The ability to maintain a stable burning and, importantly, it does not have an unpleasant taste.
Alternatively, you can choose a glass wand. This type of chopsticks is enough to generate heat to vaporize the herbs. In particular, it does not burn smoke but still provides enough cannabinoids. The flavor is also relatively mild.
Remember that the most efficient heating element will control the heat well after burning or evaporating from the bowl. Therefore, you need to choose a quality heat generator.
Another item you need to consider is the pipe guard. This screen protects you from burning marijuana fumes. However, it is not too important because you can replace it by taking advantage of available items:
- Use a piece of wire or turn a paperclip into a coil
- Use the nozzle as a screen
If you don’t like the above option, then buy a dedicated monitor. Do not use aluminum, soft drink cans, or window screens because these items pose a danger when exposed to heat. Maybe a substance that humans should not inhale, so you should not do the dose.
Of course, you can’t forget about marijuana, the ingredient that gives you pleasure. You should divide the cannabis into equal parts before putting it in the bowl. In doing so, the resulting smoke flow is more uniform and even.
How To Pack A Bowl?
The wrapping of the cannabis bowl is also quite simple, and the mandarins will do it very quickly. However, if you are trying this hobby for the first time, you should follow the steps below:
Step 1: Gather materials
The type of cannabis you use will determine the prominent flavor in your every puff. Therefore, you need to be meticulous in choosing ingredients.
If you are using your post-harvest cannabis shoots, this is a great experience because there is nothing more wonderful than tasting the fruit after days of hard work.
However, the cannabis buds bought from outside are not bad either. You need to be careful and choose the ones that are not too cheap; they still taste great.
Step 2: Grind ingredients
The smoke is uneven, and the nugs don’t burn well if your marijuana is raw.
Therefore, the next important thing you have to do is crush the prepared ingredients. You pay attention during the grinding process to create small pieces of the same size. That way, it will burn more evenly.
However, you also do not need to be too cold. The grinder will help you to make the right grinding pieces.
You need to drop the marijuana and the machine’s compartment. Then, cover the lid and screw it back and forth until the seeds are completely crushed.
Without a grinder, you can use the scissors available at home to cut. When pulling doesn’t work, you can directly use your hands to break it.
Using your hands will give uneven results, so you should prepare a grinder. This item is essential when you intend to pursue this hobby for a long time.
Step 3: Pack the bowl
After grinding, you pick up the right pinch and put it in to catch, using your fingertips to pack the cannabis into the bowl.
You should not pack the fruit bowl loosely because it may cause the bowl to burn. Similarly, wrapping too tightly will clog the hole in the bottom.
During the wrapping process, you leave your tube on a plate or tray to make it easier to recover the loose pieces.
Besides, you can put a large block in the bowl before wrapping the marijuana. The purpose of this large block is to short the smoke, and it acts as a shield.
Step 4: Inhale
After packing, you start using the lighter to light the marijuana. You burn the area closest to the edge of the bowl and begin to inhale.
When burned in this position, the bowl will tilt and gradually form a cherry. The shape of the fruit makes it easier to inhale the rest of the cannabis in the bowl.
To avoid coughing, inhale as slowly as possible and exhale slowly and evenly to enjoy the euphoria that this stimulant brings. At first, you need to make it a habit to let your airways receive this airflow. So, do not rush to take a deep breath.
Step 5: Clean up the bowl
When you have sucked up all the ingredients in the bowl, you can blow or lightly tap the sides of the bowl with your hands to clear the ash. However, this is not always effective. So, you can use polishing tools, paper clips, or toothpicks.
If you have a dedicated polishing tool available, that’s great. Remember, you need to bring those items with you every time you smoke from the bowl.
Step 6: Store for later use
Clean, you put the bowl and smoking tools in a safe place. The next time you use them, you continue to pull them out to have fun.
Learn The Ritual Of Sucking In A Bowl
Everything in life has its own rules and regulations. Of course, these restrictive rules can be frustrating, but not following them will be more annoying.
So, as a beginner to this hobby, you must memorize the unwritten rules for a better experience.
When smoking with more than one person, be sure to pack enough herbs for the number of people in the smoking ring.
For intimate meetings, you prepare a personal bowl. As such, you can alternately light the consumable bowls in one go.
For large groups, bowls should be heavier to ensure everyone enjoys the fresh green flavors.
In addition, the cannabis supplier must determine who will perform the first smoke. You light up the cannabis section accordingly to make sure everyone has the same experience. Best of all, this observation and calculation will leave no residuals in the end.
If the bowl is still light, you are free to pass it on to others. However, if the bowl is dry, please signal to the person next to you to move the bowl.
The notice will show that you are a thoughtful and polite person. Everyone will love such a kind person, and they will gladly welcome you next time.
During a smoke-filled excursion, you’ll find plenty of lighters on the table. Even if you like it very much, you must refrain, this item is not too valuable, but it evaluates you. Obviously, everyone doesn’t like petty thieves.
Packing the bowl is an essential step for you to enjoy the perfect taste of cannabis. Therefore, do not ignore the notes in the process of wrapping the bowl.
Is there a wrong way to pack bowls?
Of course, the wrong packaging is entirely normal and is bound to happen.
Simply put, machines sometimes make mistakes, human actions cannot always be perfect. Therefore, there will be times when you unintentionally close the bowl too tightly or too loosely. Both of these ways are wrong.
Can you pack a bowl with tobacco?
Wrapping bowls with pills is possible. It is similar to the pack with marijuana. All you have to do is add the right amount, light it and watch the red glow as you inhale.
How much tobacco is in a bowl?
In each bowl, you can use 1-3 grams of tobacco. Each gram corresponds to 30-50 milligrams of nicotine. With this ratio, you can find the taste of good tobacco on the market.
How to pack a bowl? You need to follow the instructions exactly and have an exciting cannabis party right away. You may be confused the first time or two. Overcoming that difficulty, you will become a professional packer.
Thank you for reading!